[Thread Prev][Thread Next][Thread Index]

Re: [PilotMgr] Re: Unable to hotsync to Ultra10



Assuming you are going through the serial port, Try checking what serial
port you are connected to (either 'A' or 'B').  This marked on the chassis 
where your cradle cable plugs in at on the back of your Workstation.

After checking that, go to 'properies' under the file menu on pilotmanager.
check to see if that matches.  If your cradle is plugged into the 'A' port,
the pilot port should be set to "/dev/ttya".  If the cradle is pugged into the
'B' side, the setting should be "/dev/ttyb".  If the Pilot Port setting is
wrong, click on the port button and select the right one from the list.

Now, assume all that is correct, it maight be the speed is wrong.  I have
Visor and can only use Comm speeds between 9600 and 38400.  Any faster (high)
number and I get the same error.

Best of luck
Frank


> Date: Mon, 24 Jan 2000 14:59:20 -0800 (PST)
> From: Sylvia Flores <srflores@xxxxxxxxxxxxxxxxxxxx>
> To: pilotmgr@xxxxxxxxxxxxxxxxxxxx
> Subject: [PilotMgr] Re: Unable to hotsync to Ultra10
> 
> Hello:
> 
> I am not a very technical person who just aquired a PamlVII and I am 
> trying to get it to work with the Ultra10 I have as a desktop. I followed
> the installation instructions but I am getting an error message.
> 
> Has anyone experienced this? I tried the tip regarding the configuration
> of the serial ports but no luck. The error message reads as follow:
> 
> The connection between your handheld computer and the desktop could not
> be established. Please check your set up and try again!
> 
> Any assistance and/or advice is greatly appreciated.
> 
> Regards!
> 
> Sylvia Flores
> ext. 30315
> 
> ------------------------------------------------------------------------
> ***********************************************************
> *             This is a public mailing list!              *
> * Please do not publish Sun proprietary information here! *
> *        -  -  -  -  -  -  -  -  -  -  -  -  -  -         *
> * MoreInfo/Unsubscribe @  http://www.moshpit.org/pilotmgr *
> ***********************************************************

======================================================
Frank Daniel
PPA/ORT MTS      Phone: 510 574-6698
                        Pager: 408 697-8195
                        Pager Mail: fdan@xxxxxxxxxxxxx
______________________________________________________
   As you go through life worrying about the future.   
Remember: Most of it is just water under a bridge
you've yet to cross.

KMickey 1995
______________________________________________________

------------------------------------------------------------------------
***********************************************************
*             This is a public mailing list!              *
* Please do not publish Sun proprietary information here! *
*        -  -  -  -  -  -  -  -  -  -  -  -  -  -         *
* MoreInfo/Unsubscribe @  http://www.moshpit.org/pilotmgr *
***********************************************************


SourceForge.net Logo