missing conduits

[perley@xxxxxxxxxxxxxxxxxxxxxxxx (Perley Mears)]

I don't know if this has been mentioned before, but since it helped a colleague of mine, I thought it worthwhile to send to the list. Due to some moving of directories and other unknown causes, we were unable to see most of the conduits in the list of avaiable conduits under Properties, even though the files did exist in the pilotmgr directory and had wide open rights. We tried several things to get them back, and what eventually worked was a multi step process as follows.

	1) move the conduit file to another directory, ex. # mv SyncMemo.pm ..

	2) start PilotManager - you will get an error in your console indicating the moved conduit could not be found.

	3) close PilotManager.

	4) move the conduit back, ex # mv ../SyncMemo.pm .

	5) start PilotManager - you should see a message in your console saying the conduit was added to the list of available conduits.

	Now you should be able to see the conduit in question under Properties. Do these same steps for each conduit that PilotManager doesn't see. Again, due to the number of changes involved, we are not sure what actually hosed the PilotManager configuration, but this resolved the problem and might help someone with a similar problem. I hope this helps someone.

Perley Mears.

------------------------------------------------------------------------
***********************************************************
*             This is a public mailing list!              *
* Please do not publish Sun proprietary information here! *
*        -  -  -  -  -  -  -  -  -  -  -  -  -  -         *
*             http://www.moshpit.org/pilotmgr             *
***********************************************************