Re: Serial Port Config.

[Jan Hauser - Sun Federal Systems Engineering <Jan.Hauser@Ebay>]

The "gender bender" adaptor I have borrowed is said to 
be a strait-thru with no pin swapping, but if the serial port
config. suggestions don't work, i'll be at this puppy with
my ohm meter checking it out.

Thanks! - Jan

> Date: Wed, 18 Feb 1998 08:58:06 -0600
> From: ebrouwer@xxxxxxxxxxxxx (Ernie Brouwer)
> To: Jan.Hauser@Ebay
> Subject: Re: Serial Port Config.
> 
> Don't mean to offend with a silly question, but what is your cabling
> like?  Doesn't the cradle cable end in a female connector?  What are
> you using to convert it to a male connector (to plug into the female
> connector on the Sun)?  Perhaps you're changing the pinout....  A
> straight gender changer is required, no pins should be swapped.
> 
> Hope this helps.
> 
> --Ernie 
> pb3-2460 (for real), x93088 (for real), pager 933-7254 (for real)

Thanks,
Jan Hauser
==============================================
    /\        Jan Hauser
   \\ \       Principal Architech
  \ \\ /      Sun Microsystems Federal, Inc.
 / \/ / /     3571 North First St. M/S SJC01-105 
/ /   \//\    San Jose, CA 94134-1803
\//\   / /    
 / / /\ /      
  / \\ \      Phone:  (408) 953-4840
   \ \\       Fax:    (408) 383-0362
    \/        EMail:  jan.hauser@xxxxxxxxxxxx
	      Pager:  (800) 266-8218
------------------------------------------------------------------------
***********************************************************
*             This is a public mailing list!              *
* Please do not publish Sun proprietary information here! *
*        -  -  -  -  -  -  -  -  -  -  -  -  -  -         *
*             http://www.moshpit.org/pilotmgr             *
***********************************************************