Re: Unable to initiate HotSync because the serial port ...

[Arthur Black <Arthur.Black@Eng>]

Jim when I ran into problems with the serial port on my machine, I solved it by 
doing a reboot.  I did not have the same error message that you do.

Art Black

> Date: Fri, 24 Apr 1998 08:43:13 -0400 (EDT)
> From: Jim Koelkebeck - SE Sun McLean VA <Jim.Koelkebeck@East>
> To: pilotmgr@xxxxxxxxxxxxxxxxxxxx
> MIME-Version: 1.0
> Content-MD5: ZdmzTHSZHfJmgY7X2g2zqg==
> 
> All:
> 
> I have a Pilot Professional and with my latest attempts to hot sync, I get
> a message on the Pilot: "Unable to initiate HotSync because the serial port
> is in use by another application".  I have reset and checked for anything
> new that was installed recently (nothing), can't figure out why the serial
> port is busy.  This message appears with and without the hotsync cable or
> the cradle connected and happens both with Lose95 and Solaris (1.105).
> 
> Any ideas?
> 
> ------------------------------------------------------------------------
> ***********************************************************
> *             This is a public mailing list!              *
> * Please do not publish Sun proprietary information here! *
> *        -  -  -  -  -  -  -  -  -  -  -  -  -  -         *
> *             http://www.moshpit.org/pilotmgr             *
> ***********************************************************

Arthur Black
650-786-5307
650-786-7352 (fax)

------------------------------------------------------------------------
***********************************************************
*             This is a public mailing list!              *
* Please do not publish Sun proprietary information here! *
*        -  -  -  -  -  -  -  -  -  -  -  -  -  -         *
*             http://www.moshpit.org/pilotmgr             *
***********************************************************